Evercade Nexus review: bigger screen, twin sticks, and a bridge to 3D classics
Wired's hands-on review finds Blaze's new retro handheld improves comfort, display and controls while keeping cartridge compatibility—and dropping TV output.
.jpg)
Blaze Entertainment's Evercade line has built its identity around physical cartridges and licensed retro games. Wired's review of the new Evercade Nexus treats the device as the most substantial update to the handheld family so far, while noting that it preserves compatibility with earlier Evercade cartridges.
The first change is size. At 215 x 111 x 34 mm and 410 g, the Nexus is closer to a Switch Lite than to the pocket-sized Evercade handhelds. Wired says the larger body improves hand comfort. The control set follows the Evercade EXP—D-pad, ABXY face buttons, shoulder buttons and triggers—but adds textured grips, chunkier curved triggers and, most importantly, two symmetrical thumbsticks. The sticks also change Tate Mode: the screen rotates 90 degrees for vertical arcade games, and the reviewer found the Nexus layout more comfortable than the EXP's because it uses the right stick and standard face buttons rather than duplicate left-side inputs.
The display is a 5.89-inch IPS panel at 840 x 512, or 167 ppi, with brightness above 500 nits. Wired describes it as clear, colorful and a major improvement over the earlier 4.3-inch LCD. The review does flag two build issues: a D-pad that sits too high and rocks slightly, and glossy trim around the face buttons that scratches easily.
Internally, the Nexus does not upgrade the processor or memory. It keeps the EXP's 1.5 GHz quad-core chip and 512 MB of RAM. Wired says games run without performance problems, but system navigation is slow: booting takes roughly 35-40 seconds and loading a cartridge can take similar time. There is also no quick-suspend feature. The battery grows to 5,000 mAh from 3,000 mAh and delivers about five hours of play, roughly an hour more than before, according to the review. Audio is louder and clearer through front-facing stereo speakers, and Bluetooth is added for wireless headphones alongside the 3.5 mm jack.
Connectivity improves with Wi-Fi 6 and 5 GHz network support, which Wired says helps with updates and the free Game of the Month. The Nexus also introduces EverSync, a wireless feature intended to let multiple units play multiplayer with only one cartridge; the reviewer had not tested it. The operating system adds customization for menu colors, the LED logo, screen borders, aspect ratios and scan lines.
One feature is removed: the mini-HDMI output found on earlier handheld Evercades is gone. Wired calls that disappointing, though TV play remains possible through the Evercade VS-R set-top console.
The more consequential change is software. Wired says Blaze states the Nexus supports 32- and 64-bit games, and the first cartridges in that category are native ports rather than emulation. A Banjo-Kazooie and Banjo-Tooie double-pack and a DOOM and DOOM II collection are said to offer widescreen presentation, higher resolution up to 60 fps and on-cartridge save slots. Wired found the Banjo games especially strong on the new screen and sticks, while saying the DOOM ports show their age. The cartridges still work on older Evercade hardware, with camera controls mapped to shoulder buttons and slower rotation.
Wired's overall judgment is positive: the Nexus is its preferred way to play the Evercade library and the new native releases. The review also suggests that Blaze's cross-device compatibility may eventually limit how much power future Evercade hardware can add—an interpretation, not a confirmed product plan.
Sources and further reading
See an error? Read our corrections policy or email [email protected].
TECHNOMALIST

